How to check if the roosting rack is in the correct position

If you are using your Autodoor with an Eglu Cube or Eglu Pro then you should check that the roosting rack is not touching the Autodoor. 

Look inside your Eglu and check if there is a gap between the roosting rack and the Autodoor.

Step 1 - Remove the roosting rack and drooping trays

Step 2 - Check the roosting bar is positioned in the correct position

Step 3 - Put the dropping tray and roosting bar back into the Eglu.

Check there is a finger width gap between the roosting bars and the Autodoor.