Updating firmware in non-smart mode

Step 1: Connect your Autodoor to the Omlet App

• How to Connect your Smart Autodoor to the Omlet App.

Step 2: Check the firmware has updated

After connecting the Autodoor, wait 15–20 minutes in order for the firmware to update. Once this is done, you can check your current firmware version:

• Through the control panel
• Through the app

Step 3: Disable the Wi-Fi option

To once again use the door offline, follow this guide:

• How to turn off the Autodoor Wi-Fi.
  
  

If you wish to go back to smart mode, you can navigate to the same menu option, and select “Enabled”. Your control panel will then reboot and re-connect using the previously saved Wi-Fi details.