My Eglu Go Automatic Door Opener shows "Crush Detected"
If your Eglu Go Opener control panel shows "Crush Detected" please follow the below steps:
1. Wake your control panel by pressing OK
1. Wake your control panel by pressing OK
2. Scroll down your menu to option 10. Calibrate (12. Calibrate if on Light Mode)
3. Press and hold OK
4. Change the Flashing 'N' to 'Y' using the arrows
5. Press OK
Your door will now calibrate, opening and closing 3 times, then your door type should change from 'Sliding' to 'Rotary' allowing your control panel to instruct your door as expected. The Crush Detection message should no longer show.
If you are still experiencing issues after attempting a recalibration, please contact our support team at info@omlet.co.uk for further assistance.
3. Press and hold OK
4. Change the Flashing 'N' to 'Y' using the arrows
5. Press OK
Your door will now calibrate, opening and closing 3 times, then your door type should change from 'Sliding' to 'Rotary' allowing your control panel to instruct your door as expected. The Crush Detection message should no longer show.
If you are still experiencing issues after attempting a recalibration, please contact our support team at info@omlet.co.uk for further assistance.